Conveyor Maintenance

Conveyor belts are a key component of many businesses. But if they aren’t maintained properly, conveyor belts can quickly break down and become ineffective. In order to keep your conveyor running at peak efficiency, it’s important to perform regular maintenance on it. Here are some tips for keeping your company’s conveyors in tip-top shape:


Belt Check


● Wear: The belt should be checked for wear by looking at the surface of the belt. The outer layer of a conveyor belt is made up of thousands of tiny fibers that are woven together to form its top layer. As these fibers wear down, they separate and form gaps between them, which can cause premature failure of the conveyor system.
● Damage: If there is damage to your conveyor system, then it should be repaired immediately as this will lead to further damage within it or even complete failure if not repaired in time. This damage could include cuts or tears in the fabric as well as burns from hot materials coming into contact with it, so always check for these things before moving anything along your path!
● Cracks: Cracks may appear anywhere along your conveyor line, but they’re most likely found at one end where there’s more stress placed upon that particular part compared with other areas closer toward where items enter/exit through entrances/exits located throughout industrial buildings (such as warehouses). Repairs need only happen once cracks reach 1/8 inch wide since anything smaller would most likely go unnoticed until too late–when large chunks break off unexpectedly, causing injuries when people walk into them while working around machinery like conveyor systems inside factories where dangerous chemicals might spill onto floors below, where workers could fall victim depending upon how far away they’re standing from falling debris! Make sure all staff members know about this hazard so nobody gets hurt working outside during lunch breaks too. “

Motor Check

Check the Motor:


● Check for belt alignment. If a conveyor is not aligned, it can cause excessive wear on belts, damage to the idler pulley and/or motor bearings, belt failure, and other problems.
● Check for belt tension. Too much tension will cause undue stress on motors or bearings and can lead to premature failure of these components; too little tension could allow the belt to slip on its pulleys, causing damage to itself and possibly other equipment as well (such as a fork truck). The following procedure should be used:
● Use an unloaded belt off the conveyor and measure its length against a ruler or tape measure; use this measurement to determine what percentage of stretch there should be in order for it to run properly when loaded with the product.


System Check

If you’re going to do conveyor system maintenance, you need to check the belt, motor, and other parts. If the belt is broken or the motor is not working properly, then it will cause an issue in the conveyor system. So it is necessary that you check all these things before starting your work.


Regular maintenance is an important part of keeping conveyor belts running effectively

Regular maintenance is an important part of keeping conveyor belts running effectively. If you find that your belt has become worn or damaged, it might be time to consider replacing it. While maintaining your conveyor belt, you should also regularly check for wear and tear as well as foreign objects that may have gotten stuck in the system. This will allow you to catch any problems before they become too serious and cause costly downtime for your business.


Regularly inspecting your conveyor belt can help reduce the possibility of accidents and injuries occurring due to faulty equipment or lack of maintenance. If a problem does develop with one area of a belt system, then this could lead to injury if someone else comes into contact with it later on down the line when no one is looking out for potential hazards like this beforehand—so always keep safety first!

Make sure you keep up with your conveyor maintenance. It will help you avoid big problems down the road, and it can even improve the efficiency of your equipment. For more information about conveyor systems solutions, please visit Tru-Trac.


This article was first published at https://topclickblogs.co.za/conveyor-maintenance/

Leave a Reply

Your email address will not be published. Required fields are marked *